| Author | Message | ||
     Geoff Wootton Grand Master Username: dounraey Post Number: 1724 Registered: 5-2012 |
Whist carrying out work on my braking system I thought this would be a good time to get the reservoir re-plated. I particularly like the look of Kelly's electroless nickel plated reservoir. However, I seem to recall an earlier thread that advised using a particular zinc/nickel mix. Does anyone know of this or is it ok to use any particular incarnation of nickel plate. I'd appreciate any views or advice on how best to proceed on this. Geoff | ||
| David Gore Moderator Username: david_gore Post Number: 2582 Registered: 4-2003 |
Geoff, Have a look at the following threads: http://au.rrforums.net/forum/messages/17001/17752.html http://au.rrforums.net/forum/messages/17001/20536.html Robert Reddington used Imron paint [note his warning about application] http://au.rrforums.net/forum/messages/17001/18312.html Kelly Opfar used electroless Nickel plating http://au.rrforums.net/forum/messages/17001/19983.html Hope this helps rather than causing angst about which way to go  . * |
