Wood lacquer removal and gaffer tape. Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Miscellaneous » Wood lacquer removal and gaffer tape. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Robert Noel Reddington
Grand Master
Username: bob_uk

Post Number: 620
Registered: 5-2015
Posted on Sunday, 18 October, 2015 - 08:58:   Edit PostDelete PostView Post/Check IP

My drivers door capping has flaky lacquer on the top caused by rain.

I stuck gaffer tape to it and pulled the tape off after 15 seconds and the lacquer came off and stuck to the gaffer tape.

A completely safe way it cannot damage anything. And it's very quick.

The rest of the capping is ok so a quick rub down and feather the edges with care then hit it with 9 coats of clear coat. Clear coat aerosol 500ml 4 quid. So nice and cheap.

Also if nails are hammered into the table so that they support the bit to be painted off the table by 2" then spraying is much easier. Like a bed of nails.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Please quote Chassis Numbers for all vehicles mentioned.
Password:
E-mail:
Action: