Replacing Boot Torsion Bars

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Jeffrey McCarthy Grand Master Username: jefmac2003 Post Number: 435 Registered: 5-2007 Posted on Tuesday, 01 July, 2014 - 07:47:    I'm finally getting around to replacing the broken torsion bar in my boot. I've sourced a new pair and will do both at the same time. My question is; do I remove both hinges, assemble as a unit and then re-mount the hinges or do I mount one hinge and then lever the other hinge upwards with a bottle jack (or even the Shadow jack?) Seems like an awful lot of force is needed either way; any safety concerns I should be aware of? Anyone ever done this? Is it a two man job or can I do it myself?   Bob uk Unregistered guest Posted From: 94.197.122.83 Posted on Wednesday, 02 July, 2014 - 05:29:    Never done this I have similar and tips are watch your fingers And have a torch and climb in boot lowering the boot lid takes some weight off Avoid dismantling hinges Cock the lock so that you don't get locked in Oil with grease where torsion touch or seat so they don't creak (Message approved by david_gore)