| Author | Message | ||
     Larry Halpert Frequent User Username: larry_halpert Post Number: 29 Registered: 9-2003 |
This is the correct oil plug for your Rolls Royce V-8 Silver Shadow, Spirit, Spur, Corniche, Bentley T1, T2, Mulsanne, Brooklands, Turbo R, etc. from the 60's through the 90's. It eliminates the original brass plug that uses a specific Rolls Royce tapered allen socket that is expensive, and now not neccessary. People try to fit regular allen wrench sockets, and just ruin the plug as the regular sockets are not tapered. This plug uses a regular 15/16" or 24mm wrench/spanner/ or socket. That's it, and you're DONE. Includes new washer. I have a few available at $12 US. Please email to let me know. Thanks, Larry tbird@consultant.com  | ||
| John Dare Unregistered guest Posted From: 144.138.194.79 |
Thanks Larry. A most practical "modification" if I may be so bold as to describe it so. Unfortunately I have (only recently!) purchased a new original replacement. The original recessed hex. had been ruined over the years, but at least it hadnt been attacked on the circumference with a chisel. I guess youve seen it all. Thanks again for offering such an innovative, simple and practical item. (Message approved by david_gore) | ||
| Larry Halpert Prolific User Username: larry_halpert Post Number: 31 Registered: 9-2003 |
Hi John, Thanks for the comments. It's all in my quest to find cross-references for practical, lower cost, equal OR better quality replacement/maintenence parts for these (& my) car. Larry |
