Author |
Message |
franck yahi
New User Username: franktr
Post Number: 5 Registered: 11-2019
| Posted on Monday, 02 December, 2019 - 10:02: | |
Hello everyone, I don't know if the subject had already been treated so please forgive me if I am redundant. Would you please advise me on a nrand and à model that can replace "the big brakes". I fond 340 mm rotors on the net but Since I am à newbie I hesitate. Thank you All for your assistance. Au revoir Frank |
gordon le feuvre
Frequent User Username: triumph
Post Number: 324 Registered: 07-2012
| Posted on Tuesday, 03 December, 2019 - 19:43: | |
Franck, pretty sure big brake rotor is 340mm. the kit was available as retro fit in early(mid/late eightes) turbo, but required the bigger wheels. Introcar and Flying Spares have UK parts web sites. also if you go on web and enter bentley heritage, this is official Bentley site. Under heading of "technical" are the parts catalogue that can be filtered by putting your model in of by fining your vin/chassis number. Once you have part number for your correct rotor, you can tap into web and see what comes up. This is sometimes very useful. hope it hepls |
|