|Posted on Sunday, 22 April, 2001 - 02:35: |
My 78 Shadow II oil and water gauges both read low - water stays below the white 'normal' section even after a long run - does anyone know why this might be (thermostat is ok - heater works fine etc.)
Do the gauges share a common earth or live feed? Are the sensors easy to check/replace?
Suggestions greatfully received.
|Posted on Thursday, 24 May, 2001 - 22:58: |
I have a 1980 SS2 and have had my local Auto Electrican have a look at a similar concern of mine. He had a device that was able to check the guage reading so as to match the sender unit reading. The result was he replaced the sender unit( from a mass produced vehicle ) and the guage normal reading is now half way in the white section.
I can not comment on the oil guage. Cheers