| Author | Message | ||
     Jeffrey McCarthy Prolific User Username: jefmac2003 Post Number: 104 Registered: 5-2007 |
I am trying to repair some minor damage to the black vinyl around the seat switches in the centre console of the Shadow (series one). After trying to do it in situ I've decided that it really needs to be taken out to be done properly. There are two chrome rings holding the switches in place; an outer and an inner. The inner has a small hole in the rim which would seem to be for starting to loosen the thread - assuming there is one. It doesn't move however. Should I carefully put some WD40 there and force it? Or do these switches come off some other way? If anyone has ever removed these I'd appreciate some advice. Cheers, Jeff | ||
| Paul Yorke Prolific User Username: paul_yorke Post Number: 282 Registered: 6-2006 |
Yes  Also there are two screws under the tunnel carpet which may let you turn the housing a little, so you can wiggle the switches from the back to help loosen the inner ring. There is a flat on the thread so it will not turn completely | ||
| Jeffrey McCarthy Prolific User Username: jefmac2003 Post Number: 105 Registered: 5-2007 |
Thanks Paul - I've found the 2 scews under the carpet and will work on it today. |
