| Author | Message | ||
     David Howard Unregistered guest Posted From: user-514f61c0.l4.c3.dsl.pol.co.uk |
Dear Sirs,Shadow SRH 14936 Is it possible to remove the rear accumulator without removing the front one first(the car is the type with the accumulators mounted together on the crankcase) I do have the manual which suggests both have to come off but I am sure that someone from the club advised that just loosening the bolts on the front one gave clearance to remove the rear one Thanks (Message approved by david_gore) | ||
| Bob UK Unregistered guest Posted From: brig-cache-4.server.ntli.net |
Ten years since I touched my Accumulators (good ones can last for years -- but the O ring can fail sooner ) From memory the rear acc/valve assembley will NOT clear the subframe with the front ass. in place. Give a try by loosen the bolts if not retighten and remove the pipe work. The pipe from the pump is 3/4 AF The flex stainless pipe is 7/16 AF The return is 1/2 AF The bolts are 7/16 AF The pressure switches should be Lucar spades. If the boots look tatty these are available from Lucas Do not forget the small wiring clips for the pressure switches. (Message approved by david_gore) |
