| Author | Message | ||
     Richard Greene Frequent User Username: benzjag Post Number: 229 Registered: 12-2012 |
I want to remove the clock from my 89 Turbo R which is in the center console above the radio. I know how to remove the entire center console, but was wondering if I could remove the radio & be able to get to the clock? If so, how is the clock attached? Thanks! Richard | ||
| Omar M. Shams Grand Master Username: omar Post Number: 2110 Registered: 04-2009 |
I remember capturing this in an old post from the 90s or early 2000s. | ||
| Darryl Watson Experienced User Username: inox Post Number: 152 Registered: 04-2015 |
Hi Richard, The three instuments are on a sub panel and you need to remove the entire console to access the two panel securing screws. The wires to the three instruments are fairly short but there is (just) enough room to disconnect the plugs when the console has been moved backwards a little. Once you have the console out access to the three instruments is easy. Regards, Darryl | ||
| Omar M. Shams Grand Master Username: omar Post Number: 2111 Registered: 04-2009 |
look up this thread http://au.rrforums.net/forum/messages/17002/8974.html and just look at the photos | ||
| Richard Greene Frequent User Username: benzjag Post Number: 230 Registered: 12-2012 |
Thanks, Darryl and Omar! Appreciate the info. As mentioned, I was just trying to not move the console! Oh well... Richard |
