Author |
Message |
   
Patrick Hunziker
Experienced User Username: pahu
Post Number: 18 Registered: 7-2016
| Posted on Sunday, 11 December, 2016 - 20:45: |    |
On my Turbo S there is a Intercooler System with separate Cooling System fitted. Once i found a description about bleeding this system in TSD6000... There was something with a relay to be bridged... Someone out there, who knows where to find this description? Regards Patrick |
   
Omar M. Shams
Grand Master Username: omar
Post Number: 943 Registered: 4-2009
| Posted on Monday, 12 December, 2016 - 01:59: |    |
Dear Patrick, this system is a low pressure one that has a separate electrically driven pump to push the coolant around. I always thought it was self bleeding. If you don't think it is and someone out there knows how to bleed it I will also be happy to know the procedure. |
   
Patrick Hunziker
Experienced User Username: pahu
Post Number: 19 Registered: 7-2016
| Posted on Monday, 12 December, 2016 - 02:32: |    |
Hello Omar I found out how to do... In TSD5000 in Chapter L9 the procedure is written... But i don't do it like written, it's to complicated... I fill the expansion bottle and the i start the pump and bleed the air with on the plug on top of the Intercooler... looks like it works... Patrick |
   
Omar M. Shams
Grand Master Username: omar
Post Number: 944 Registered: 4-2009
| Posted on Monday, 12 December, 2016 - 03:09: |    |
Thanks Patrick. I will follow your lead on this one. Omar |
   
richard george yeaman
Grand Master Username: richyrich
Post Number: 668 Registered: 4-2012
| Posted on Monday, 12 December, 2016 - 08:36: |    |
Hi Patrick thanks for the info, any other little gems of knowledge yould like to share would be appreciated, Richard. |