Author |
Message |
james gibson
New User Username: jimbob
Post Number: 2 Registered: 3-2016
| Posted on Wednesday, 16 March, 2016 - 10:17: | |
i have 1990 turbo r 31363. I was looking through the error codes and must have pressed to many buttons as i always do, now an air bag light is on the dash underneath the engine check light but the car does not have an air bag. Does anyone know how to turn the air bag light off |
Paul Yorke
Grand Master Username: paul_yorke
Post Number: 1478 Registered: 6-2006
| Posted on Wednesday, 16 March, 2016 - 18:13: | |
Were you also using the dip trip and cancel buttons? Probably there. |
Omar M. Shams
Grand Master Username: omar
Post Number: 546 Registered: 4-2009
| Posted on Wednesday, 16 March, 2016 - 22:28: | |
Dear Paul, I don''t think I understand your post. I am keen to understand the solution to this problem too. Thanks Omar |
Paul Yorke
Grand Master Username: paul_yorke
Post Number: 1480 Registered: 6-2006
| Posted on Wednesday, 16 March, 2016 - 22:35: | |
Hi, Sorry, rushing around Omar. To set the dip panel up you switch functions on or off. Cats. Overspeed warning. F or centigrade. . And possibly air bags. ? To adjust it you hold the cancel and trip buttons down as you turn on the ignition. Hold them down to reach adjust mode. It's on assist. It can be tricky and switching the wrong setting is easy but annoying. If you can't find it let me know. Cheers. Paul. If you can't |
james gibson
New User Username: jimbob
Post Number: 3 Registered: 3-2016
| Posted on Thursday, 07 April, 2016 - 07:17: | |
Hi Paul To set the dip panel you switch functions on or off. where are switch functions so as i can turn them on or off. thanks for your help regards Jim |