Piper Window Motor Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Silver Shadow Series » Piper Window Motor « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Richard Greene
Frequent User
Username: benzjag

Post Number: 267
Registered: 12-2012
Posted on Thursday, 29 August, 2024 - 15:01:   Edit PostDelete PostView Post/Check IP
The relays click nicely on my Piper Window Motor. I have freed up the shaft. There are two blackish wires on top of the winding that are not connected to anything (PIC). Each wire WAS the same length until I cut one of them too short!

Are these suppose to be soldered to the winding? Are they suppose to be joined to each other? There was some brown tape
around the winding that has been removed in the PIC. There was no trace of a previous solder.


Any help much appreciated!

Richard

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Please quote Chassis Numbers for all vehicles mentioned.
Password:
E-mail:
Action: