| Author | Message | ||
     Avery Wise New User Username: hans3 Post Number: 17 Registered: 08-2017 |
A vendor recently offered a batch of NOS rectangular washer reservoirs / pumps on E-Bay. I bought one and it's as advertised--even has the level sensor bolt heads I needed (assume they conduct through the washer fluid itself). Product came with a capacitor and wire strand in a RR-branded ziplock. I presume this is intended as some form of delayed shutoff but wanted to confirm whether it gets wired in series with the pump (+) wire? Tech archive wiring schematics don't show it. Link: clickhttps://www.ebay.com/itm/BRAND-NEW-INVENTORY-JUST-IN-ROLLS-ROYCE-CORNICHE-BENTLEY-WASHER-RESERVOIR-PUMP/264428616493?hash=item3d912c7b2d:g:IdoAAOSwl-ddDqgI | ||
| Robert J. Sprauer Frequent User Username: wraithman Post Number: 507 Registered: 11-2017 |
That is a capacitor commonly used in RR electrical systems. It goes from Positive to ground and is used to suppress noise generated by the electric pump motor. It is not a delay and not wired in series. |
