| Author | Message | ||
     Stefan Ihnat Experienced User Username: stefan87 Post Number: 41 Registered: 8-2017 |
I have a special problem. Originally I thought it would be door selenoid, but eventually it will be a lock. I have a problem with pulling something into locked position. When I open with a central locking system, the pin slowly climbs. When I release the switch the pin drops down. It will do the same when I raise it manually. When I want to open the door now, I have to hold the pin up and pull the handle. I can not get out of the door at all from outside. I was looking at the mechanism, but I did not find anything that would pull the lock down. Any tip with what? Thank you. | ||
| Paul Yorke Grand Master Username: paul_yorke Post Number: 1934 Registered: 6-2006 |
Hi,make sure the inside handle is fully in and the outside button is fully out first. | ||
| George Taylor New User Username: jocksrr Post Number: 2 Registered: 3-2018 |
My turn, proud owner1979 ss11. A few minor problems looking forward to fix my self ! With the guidance of this site.} | ||
| George Taylor New User Username: jocksrr Post Number: 3 Registered: 3-2018 |
Trying to post photos. But not able. Formating code- 1 requires 1 argument. What is 1 argument, what do i need to do ?can any one help. Thanks in advance | ||
| David Gore Moderator Username: david_gore Post Number: 2850 Registered: 4-2003 |
George, Follow this guide - if you have more problems, please message me. http://au.rrforums.net/cgi-bin/forum/discus.pl?pg=formatting#images From memory, the "Formating code- 1 requires 1 argument" message means one of the "curly brackets" { or } in the command line is missing or misplaced. Best image sizes for posting are 6in x 4in [640 x 480 pixels] for landscape orientation and 4in x 6in [480 x 640 pixels] for portrait orientation. |
