Wiring (Gear Actuator) Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Silver Shadow Series » Wiring (Gear Actuator) « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Richard Greene
Experienced User
Username: benzjag

Post Number: 29
Registered: 12-2012
Posted on Tuesday, 06 December, 2016 - 03:15 am:   Edit PostDelete PostView Post/Check IP

Im slowly getting a "salvage" LHD Shadow back together. The gear actuator wiring on my 78 is burnt under the car. Would the wiring be the same on a LHD 73 Shadow? Im assuming it is the same because both used the 400 transmission. Also, I assume there are plug-ins in the harness? If so, where would they be?

Thanks!

Richard
Top of pagePrevious messageNext messageBottom of page Link to this message

Martin Taylor
Frequent User
Username: martin_taylor

Post Number: 59
Registered: 7-2013
Posted on Tuesday, 06 December, 2016 - 05:43 am:   Edit PostDelete PostView Post/Check IP

On mine the harness plugs into the left hand toe board, from there there is one plug for the actuator and another for the kick down solenoid, should be the same

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Please quote Chassis Numbers for all vehicles mentioned.
Password:
E-mail:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: