No dashpot vent? Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Silver Shadow Series » Threads to 2015 » No dashpot vent? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeff Young
Frequent User
Username: jeyjey

Post Number: 99
Registered: 10-2010
Posted on Monday, 10 December, 2012 - 12:23 am:   Edit PostDelete PostView Post/Check IP

Other SUs I've worked on vented pressure in the piston damper chamber either through the piston damper cap to the outside, or through a hole in the piston cover to the piston chamber.

My HIF7s (on SBH37222) seem to have neither. Is this because the ball-bearing guides have enough clearance to act as vents, or do I have the wrong piston damper caps?

Thanks,
Jeff
Top of pagePrevious messageNext messageBottom of page Link to this message

richard george yeaman
Frequent User
Username: richyrich

Post Number: 72
Registered: 4-2012
Posted on Monday, 10 December, 2012 - 01:01 am:   Edit PostDelete PostView Post/Check IP

Hi Jeff.

My SRH 19529 dosent have any either I have read articles where it says you should have one but I dont know.

Cheers.
Richard.