   
Jeff Young
Frequent User Username: jeyjey
Post Number: 99 Registered: 10-2010
| Posted on Monday, 10 December, 2012 - 12:23 am: |    |
Other SUs I've worked on vented pressure in the piston damper chamber either through the piston damper cap to the outside, or through a hole in the piston cover to the piston chamber. My HIF7s (on SBH37222) seem to have neither. Is this because the ball-bearing guides have enough clearance to act as vents, or do I have the wrong piston damper caps? Thanks, Jeff |