| Author | Message | ||
     Wayne Wardman New User Username: wayne_wardman Post Number: 6 Registered: 7-2003 |
Hi I have recently found that my Cloud ! had no damper spring in either carburettor I have obtained replacements stated to be correct but they are vary much longer that those in my Shadow II (8 inch) and lower diameter (1 inch). They seem incorrect to me. any suggestions? Wayne | ||
| Paul Yorke Prolific User Username: paul_yorke Post Number: 228 Registered: 6-2006 |
Hi Wayne, From the top of my head - and I'm open to corrections. Are your pistons brass? I don't think brass ones needed springs because of their weight. If not and you have alloy pistons, it does sound like you have the correct springs. Regards, Paul. | ||
| Wayne Wardman New User Username: wayne_wardman Post Number: 7 Registered: 7-2003 |
Thanks Paul My pistons are brass i will try with and without ssprings and report back Wayne | ||
| John Budden Experienced User Username: johnb Post Number: 11 Registered: 4-2006 |
My understanding is both are true- in the 1 3/4 there are no springs. In the 2 inch before SHF207 there were no springs but springs thereafter. | ||
| Wayne Wardman New User Username: wayne_wardman Post Number: 8 Registered: 7-2003 |
Well The springs proved to be unnecessary... My pistons are brass... Wayne |
