| Author | Message | ||
     Jeff Martin Experienced User Username: jeff_r_1 Post Number: 93 Registered: 07-2018 |
My foot rests in my standard bodied 1951 Mark VI have always been missing, and now that my seats have been done, I am going to do something about it. They are the type that just sit on the carpet, what I need from someone here are the dimensions as shown in the photo ( A B C D and E) so I can make my own. I found a set that was rather ratty for 250 us dollars, which in my opinion is a little too much to swallow. Considering the screws are wrong, and the stainless steel surround is bent. Thanks !  | ||
| Tim North Unregistered guest Posted From: 5.80.57.5 |
On mine I have measured: A=20mm B=80mm C=74mm D=24mm. I hope this helps. Tim north (Message approved by david_gore) | ||
| Jeff Martin Experienced User Username: jeff_r_1 Post Number: 99 Registered: 07-2018 |
Thanks for taking the time. No one was answering so I did find someone local, and I will post his measurements as well. Odd that I never saw the "NEW POST" beside this post, I just discovered this now. |
