Post Number: 4
|Posted on Friday, 01 May, 2015 - 14:33: |
Have just replaced road tyres on my P11 93TA and noticed one of my wheels has three broken spokes. Has anyone any advice on a source of these spokes and perhaps a reputable repairer in Australia. I am happy to replace them myself if necessary. Best Regards, Peter Toet.
Post Number: 1591
|Posted on Friday, 01 May, 2015 - 16:32: |
Suggest you talk to a local motor bike restorer or classic Jaguar/MG owner for information on reputable wire wheel repairers close to you.
A guide to replacing spokes is on the following link:
New spokes should be available from the following supplier:
Post Number: 5
|Posted on Friday, 01 May, 2015 - 19:15: |
Hello David, Thanks for the prompt response.....I shall contact both leads and hopefully repair the wheel successfully....Kind Regards: Peter Toet.
Posted From: 126.96.36.199
|Posted on Saturday, 02 May, 2015 - 05:19: |
3 spokes are no big deal.
Remove tyre and tube.
Fit wheel to axle without tyre and tube.
Fit 3 new spokes.
Tension till they sound like the others when struck with spanner.
Spin wheel against a pointer to confirm truth. Plus or minus 1 mm is excellent.
I have done loads of bike wheels it is a straight foward spanner job.
Spoked wheels are strong and also flex a bit adding a bit to the suspension.
Have a go and you will wonder what all the fuss was about.
(Message approved by david_gore)