Wet room. Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Idler Chatter » Archive to 2017 » Wet room. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Robert Noel Reddington
Grand Master
Username: bob_uk

Post Number: 1009
Registered: 5-2015
Posted on Sunday, 03 July, 2016 - 00:06:   Edit PostDelete PostView Post/Check IP

My mate has just built a wet room. Ex ship engineer. All copper and brass fittings fitted on the wall rather than in it. It looks very robust and marine. It works well.
The hot and cold enter the room in the corner via 2 stop cocks painted to denote which is which. The shower head has a epibranch with a valve and separate hose for "undercarriage " washing. The water comes up to temp quick like this

Also he has a shower head with a suction pad which works well.

The floor is an 1" lower than the room be next .
I like the look of the pipe work so obvious and simple and easy to maintain and repair. Has that Edwardian marine look.

My wet room has a counter top and book shelves. Plus a guitar , it does go out of pitch a bit but the accouistics are good. Cello would be good. I reckon if I get Basher round with his biscuit tin drums we could make lots of noise.
Top of pagePrevious messageNext messageBottom of page Link to this message

John Beech
Prolific User
Username: jbeech

Post Number: 227
Registered: 10-2016
Posted on Sunday, 12 March, 2017 - 00:20:   Edit PostDelete PostView Post/Check IP

Where's the photo? No photos? It may as well not exist!