Springtime Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Small Horsepower » Springtime « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Theo Whitmont
New User
Username: old_mate

Post Number: 28
Registered: 04-2020
Posted on Thursday, 31 December, 2020 - 11:24:   Edit PostDelete PostView Post/Check IP

Hi Lads (Ladies too),

Its springtime at my place.... meaning I can no longer ignore that sagging feeling when I'm behind the wheel.

After too many oversized posteriors (not mine I'm sure!) imposing themselves on the drivers seat it has finally given up the Ghost



I have managed to reposition most of the springs to good effect, but there are two springs that have actually snapped.

Has anyone here had good experience in purchasing such springs? I have no idea about size or gauge and any advice or thoughts would be most welcome.

In the meantime, I wish you all a brilliant start to 2021 with lots of motoring, restoring and fun.

Thanks in advance for your help on this and in arrears for all the great advice over the past 12 months.
Top of pagePrevious messageNext messageBottom of page Link to this message

David Gore
Moderator
Username: david_gore

Post Number: 3862
Registered: 04-2003
Posted on Thursday, 31 December, 2020 - 11:47:   Edit PostDelete PostView Post/Check IP

Theo,

You might have some luck with the following Sydney-based wire spring manufacturers:

https://www.qualitysprings.com/

https://www.jubilee-springs.com.au/

http://www.bettersprings.com.au

https://www.pattinsonsprings.com.au/

Hope this helps - especially if you can take a complete spring with you.

I would have two new complete sets of springs made for your front seats as most of the cost will be the setting up of the forming machine[s] to make the spring. If luck is on your side, the still-intact original springs might also fit the rear seat and could be kept as spares.

I always expect "Murphy's Laws" always apply in situations like this if you only replace the broken spring and not the complete set for the seat involved. You can almost certainly expect another coil or more to also break shortly afterwards.

.
Top of pagePrevious messageNext messageBottom of page Link to this message

carnley3rt@btinternet.com
Unregistered guest
Posted From: 5.62.43.146
Posted on Thursday, 31 December, 2020 - 21:14:   Edit PostDelete PostView Post/Check IP

Upholstery supplies firms may stock these, just measure the wire gauge diameter with a micrometer.

(Message approved by david_gore)
Top of pagePrevious messageNext messageBottom of page Link to this message

Theo Whitmont
New User
Username: old_mate

Post Number: 29
Registered: 04-2020
Posted on Friday, 01 January, 2021 - 17:20:   Edit PostDelete PostView Post/Check IP

Thanks Gents. Appreciate the guidance.

Best wishes for the new year to all.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Please quote Chassis Numbers for all vehicles mentioned.
Password:
E-mail:
Action: