Post Number: 39
|Posted on Thursday, 26 January, 2023 - 15:44: |
Just in the process of putting a set of new seals in all 4 of my front brake calipers on a spirit 3. Would anyone be able to tell me the tightening torques of the 4 bolts that hold both halves of the calipers together please.
Robert J. Sprauer
Post Number: 817
|Posted on Thursday, 26 January, 2023 - 23:17: |
The internal galley square cut seals provide the sealing of the caliper halves so a torque figure is not required. It will only tighten so much. Standard practice is to know the max torque of a bolt based on composition and size, again not a very critical matter here.