Depressurising SZ Hydraulic System Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Spirit Series » Depressurising SZ Hydraulic System « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

julatowski
Unregistered guest
Posted From: 70.190.55.85
Posted on Thursday, 05 April, 2018 - 14:24:   Edit PostDelete PostView Post/Check IP
Does anyone know how to depressurise the Hydraulic system in a 1991 Bentley turbo-r. I'm try to replace a front accumulator valve and still have to much pressure in the system.

(Message approved by david_gore)
Top of pagePrevious messageNext messageBottom of page Link to this message

Omar M. Shams
Grand Master
Username: omar

Post Number: 1457
Registered: 4-2009
Posted on Friday, 06 April, 2018 - 00:50:   Edit PostDelete PostView Post/Check IP
oh dear.....post in the wrong place.....

The answer is just keep pumping the pedal until all the pressure dissipates. lots of pedal pumps (with the engine switched off!!!)
Top of pagePrevious messageNext messageBottom of page Link to this message

Brian Vogel
Grand Master
Username: guyslp

Post Number: 2547
Registered: 6-2009
Posted on Friday, 06 April, 2018 - 00:51:   Edit PostDelete PostView Post/Check IP
See step 1 in How to Bleed & Flush Your SZ Series Brakes/Hydraulics Easily.

That's the easy way, in my opinion, and you also then have a rough assessment of the condition of your accumulators based on how many pedal presses it takes before the lamp(s) illuminate [more is better].

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Please quote Chassis Numbers for all vehicles mentioned.
Password:
E-mail:
Action: