Electronic C/L motion sensor and immo... Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Idler Chatter » Archive to 2017 » Electronic C/L motion sensor and immobiliser failed. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Patrick Lockyer.
Grand Master
Username: pat_lockyer

Post Number: 1425
Registered: 9-2004
Posted on Wednesday, 19 July, 2017 - 07:38:   Edit PostDelete PostView Post/Check IP
Wow 17 years old and the immobiliser part of the system failed.
Solid state unit with a built in Lith/Ion battery installed this is hard wired and paired to the C/L unit which in turn uses motion sensor and a touch key to arm disarm the system
All wires are black and the faulty unit cannot be replaced.
Out with the loom and find the links to fuel and starter motor with soldered wire links I now have a running car with original C/L with the flashing leds when armed.
Just need to refit all the looms etc.



Top of pagePrevious messageNext messageBottom of page Link to this message

Patrick Ryan
Grand Master
Username: patrick_r

Post Number: 1614
Registered: 4-2016
Posted on Wednesday, 19 July, 2017 - 08:01:   Edit PostDelete PostView Post/Check IP
Now that's a job and a half Patrick.
Top of pagePrevious messageNext messageBottom of page Link to this message

richard george yeaman
Grand Master
Username: richyrich

Post Number: 773
Registered: 4-2012
Posted on Wednesday, 19 July, 2017 - 09:45:   Edit PostDelete PostView Post/Check IP
Patrick L , imagine that happening to someone like me, doesn't bear thinking about.

Richard.