Binding Brakes Log Out | Topics | Search
Moderators | Register | Edit Profile

Australian RR Forums » Silver Shadow Series » Threads to 2015 » Binding Brakes « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

stevecomer
Unregistered guest
Posted From: 92.235.157.203
Posted on Thursday, 07 August, 2008 - 05:37:   Edit PostDelete PostView Post/Check IP

hi
I have a recently aquired 1977 shaddow 11 and have just had new rear disks and replacement calipers fitted as brakes were binding , however fault still continues and one side or the other begins biding after 1 hours driving? (but not both together it seems)

(Message approved by david_gore)
Top of pagePrevious messageNext messageBottom of page Link to this message

David Gore
Moderator
Username: david_gore

Post Number: 818
Registered: 4-2003
Posted on Thursday, 07 August, 2008 - 17:52:   Edit PostDelete PostView Post/Check IP

Hi Steve,

This problem is usually associated with the flexible hydraulic hoses being well past their replacement date. You will need to replace all the flexible hoses as a matter of priority.

This problem is well documented both in this forum and in Bill Coburn's "Tee One Topics" which can be downloaded from the following link:

http://rrtechnical.info/TeeOne/teeone.htm

Please register as a user so you can make the most of this forum. If you haven't joined the RROC[Australia}, I suggest you should consider this as well.

Regards
David