| Author | Message | ||
     ross kowalski Grand Master Username: cdfpw Post Number: 790 Registered: 11-2015 |
The contacts that the turn signal assembly hits to make the dash board signal arrows illuminate on my car are broken. It's the little bronze spring seen here.  Are these a standard part for something? If not I' ll have to make a pair. | ||
| David Gore Moderator Username: david_gore Post Number: 2898 Registered: 4-2003 |
Ross, Suggest you see if there is an instrument fitter/repairer or clock repairer close by to you. I would be reasonably confident they would have something in their "might be useful in the future" scrap box that could be adapted as a replacement. | ||
| Maxwell Heazlewood Prolific User Username: tasbent Post Number: 193 Registered: 9-2017 |
These are not unique to RR-B...A generic Lucas part I would imagine. | ||
| Philip Sproston Experienced User Username: phil2025 Post Number: 30 Registered: 7-2006 |
ross I made then out of a clock spring | ||
| ross kowalski Grand Master Username: cdfpw Post Number: 811 Registered: 11-2015 |
Philip, Clock spring is a good idea. I ended making mine up from an old electrical switch arm. |
